• MADE IN TAIWAN.
• QUALIITY ASSEMBLED BY ISO 9001 & CE STANDARDS.
• THE CM-A IS CM-2 EQUIPPED WITH AN DIGITAL READOUT ON THE X,Y AND A AXES AND HIGH PRECISION CAMERA DEVICE FOR YOUR  PRECISELY GRIND, SHARPEN, RECONDITION COMPLEX TOOLS & CUTTERS
• CASTING BASE TO REDUCE VIBRATION
• PRECISE BALLSCREW USING GRINDING WHEEL SIDE X&Y AXIS
• PRECISE GRINDING ACME LEADSCREW USING THE OTHER ENTIRE AXIS.
• SUPER PRECISION MATCH SETS CLASS 7 BEARING AT SPINDLE
• THE MONASET GRINDER'S COMBINATION OF SWIVELING TURN TABLE AND MOVEABLE OFF SET SLIDE  
• PROVIDE YOUR SHOP WITH VERSATILE CAPABILITY TO QUICKLY SET UP AND ACCURATELY
• GENERATE CONVEX AND CONCAVE RADII OF VARYING SIZE.

SPECIFICATIONS:
 

WORKHEAD:
SWING OVER MAIN SLIDE	MAX DIA:  12"
COLLET WORK	DIA, MAX.:  1.25"
	MIN.:  0.12"
LEAD GENERATED BY SPIRAL LEAD MECHANISM	MIN:  1.81"
LENGTH BETWEEN SPINDLE NOSE AND TAIL CENTER	MAX:  6"
WHEELHEAD:
GRINDING WHEEL	DIA, MAX.:  4"
RANGE:
WORKHEAD:
MAIN SLIDE TRAVEL:	5.75"
OFFSET SLIDE TRAVEL, TOTAL:	5.25"
-FRONT OF CENTER:	3"
-REAR OF CENTER:	2.25"
WORKHEAD ANGULAR ADJUSTMENT:
HORIZONTAL PLANE (TURNTABLE BASE):	235°
VERTICAL PLANE,  ABOVE CENTER:	40°
BELOW CENTER:	40°
WHEELHEAD:
LONGITUDINAL SLIDE TRAVEL:	4"
VERTICAL SLIDE TRAVEL, TOTAL:	9.50"
-ABOVE CENTER:	4.50"
-BELOW CENTER:	5"
CROSS SLIDE TRAVEL, TOTAL:	7.50"
-FRONT OF CENTER:	3"
-REAR OF CENTER:	4.50"
SPINDLE SPEEDS:
(±0%,-8% VARIATION ALLOWABLE)
WORKHEAD, ONE SPEED:	436 RPM.
WHEELHEAD, THREE SPEEDS:	4000, 5729 AND 8000 RPM (MOTOR SPEED @ 3600 RPM)
INTERNAL GRINDING ATTACHMENT	(EXTRA COST)
THREE SPEEDS, APPROX.:	16,410, 23,510 AND 32,820 RPM
MOTORS, ELECTRIC:
WORKHEAD DRIVE, .	AC ( INCLUDES REVERSE ¼ HP)
WHEELHEAD DRIVE,	AC   ½ HP.
FLOOR SPACE AND WEIGHT:
AREA OF BASE ONLY:	25" X 26"
AREA REQUIRED FOR MACHINE (INCLUDING SWIVEL   AND OVER TRAVEL MOVEMENTS):	60" X 67"
HEIGHT FROM FLOOR TO CENTER OF WORKHEAD SPINDLE:	47.72"
HEIGHT, OVERALL WITH WHEELHEAD RAISED:	62.12"
NET WEIGHT:	1,525 LBS.

STANDARD ACCESSORIES:
 

Tools & box	Grinding wheel guard	A set of grinder wheel flanges.(5pcs)
Front stock support	Diamond holder back head	Standard arbor
Leveling blocks	One shot lube system	Halogen work light
Operation manual	Tooth rest centering gauge	Double end spanner

 Additional Accessories information:
 

Power requirement	6.5 KVA 3 phase 208 V/230 V max
Type of oil for Way oil	Mobil Vactra #2
Coolant capacity	Opt.

CMA-Standard Equipment

MODEL:   Wheelhead Toothrest Assembly with Extension Bar       :   Grinding Wheel Guards with Extension bar       MODEL:   Front Stock Support       :   Collets set       MODEL:   Grinding Wheel Flange (Set of 5) Standard (4) Extension (1)       :   Diamond Holder Bracket       MODEL:   Wrench for Workhead       :   Toothrest Centering Gauge

CMA Optional

MODEL:   B&S Collets No. 5,7,9       :   Frequency Inverter       MODEL:   Grinding Wheel Spindle Motor (1HP, 2HP)       :   Additional Index Plates for Spiral Indexing Please indicate size of specification.       MODEL:   Dust Collector Attachment       <    1    >