• IPC with 650M 5axes controller with 15” LCD
• ISO 9001 quality assurance
• 10HP Spindle Motor,BT-50 Spindle Taper
• 100-6,000 rpm Grinding spindle speed
• Heavy duty linear slide way to ensure toughest cutting and smoothly operating without vibration
• C3 precision ball screws hardened & ground for high accuracy and long lasting
• FC30 Meehanite  Casting main frame with annealed & stress relieved for long term reliability
• 100% Laser tested for positioning accuracy & repeatability
• Standard way cover on three axes 
• Tool box & Tools
• Coolant System
• Central lubrication system

Specification  :

TG-5 PLUS Tool Grinder
Grinding Range Max. tool length	250mm/10”
Max. chuck dia	32mm/1.25”
Max. tool dia	200mm/8”
Spindle & Motor Grinding spindle speed	Frequency drive  100~6000rpm
Grinding spindle motor	10HP/(7.5Kw)
Spindle diameter	100mm/4”
Work head Spindle taper	BT40 OR BT50
Clamping system	6kg/cm²(80psi)
Min. work head graduation	0.001º
Axes Travel  X Axis. Linear motion	400mm/16”
Y Axis. Linear motion	230mm/9”
Z Axis. Linear motion	250mm/10”
C Axis. Linear motion	360º
A Axis. Linear motion	-10º~180º
Feed rate of X/Y/Z axis	1-6,000mm/min
Servo motor X Axis. servo motor	1KW/1.4HP
Y Axis. servo motor	1KW/1.4HP
Z Axis. servo motor	1KW/1.4HP
C Axis. servo motor	1KW/1.4HP
A Axis. servo motor	1KW/1.4HP
Coolant motor	3HP & 2HP
Lubrication pump	1/8 HP
Controller Model	IPC with 650M
Number of Control axes  5 Axis	(X.Y.Z.C.A)
Floor space Floor space	3,500x2200mm
Weight	3,700Kgs/8,200LBS

 

STANDARD ACCESSORIES:
 

Tools & box	Software for Conversational programming as note 1
Leveling bolts & plate	USB 2.0  15”color LCD
Full enclosure	Cooler unit for oil coolant system
Operation manual	Grinding wheel flange *5 sets
RS-232 Interface	Pressure dust container with filter
Auto lube system	Pneumatic collet holder with VMK – 20 Collets for ψ20 mm ψ16 mm
Halogen work light	Pneumatic collet holder with VMK- 8 for ψ6, ψ8, ψ10 mm
Oil Coolant system	Plug gauge for measurement machine reference points 3-Dimesion model simulation system
Oil & Mist separators	Angular setting disc for machine reference points Pneumatic collet holder with VMK– 16 Collets for ψ12,

Note 1: endmill, ball endmill, radius endmill, tape endmill, tape ball endmill 

Additional Accessories information:

Power requirement	15 KVA 3 phase 208V/230Vmax
Air requirement	90 - 100 psi
Type of oil for Way	oil / oil chiller / pneumatic oil Mobil Vactra #2 / Shell Tellus 32 / Air tool oil
Coolant capacity	60 Gallons